Login/Register

Tender Details

Tender ID Tender2272
Reference No. TendersTime2272
Tender Brief Indian Air Force | Rotary Wing Level D Flying Simulator for 49th, 50th and 51st FTC Courses
Tender Description The Indian Air Force invites bids from eligible service providers for wet training on Level D Rotary Wing Flying Simulators for three consecutive academic years (2026–27, 2027–28 and 2028–29).
Pre-Qualification Criteria
Scope of Work
The Indian Air Force invites bids from eligible service providers for wet training on Level D Rotary Wing Flying Simulators for three consecutive academic years (2026–27, 2027–28 and 2028–29).
The selected service provider will deliver simulator-based flying training on the following aircraft platforms:
  1. Airbus ALH Mk I
  2. Bell 412
  3. Dauphin
The simulators must provide full-flight envelope coverage, including abnormal and emergency procedures, with motion, visual and avionics fidelity compliant with Level D standards. Training will be scheduled as per the requirements communicated by the buyer.
The anticipated requirement covers training for Test Pilot (U/T) and Flight Test Engineer (U/T) officers. Vendors must quote hourly rates valid from 1 September 2026 to 31 March 2029.
Professional Qualification Criteria
  1. The bidder must own or operate a Full Flight Simulator certified to Level D standards.
  2. Certification must be issued by a recognised aviation regulatory authority such as FAA, EASA, DGCA or an equivalent authority.
  3. The bidder must provide valid simulator certification and supporting technical documents.
  4. The simulator must support the specified aircraft configurations and training requirements.
  5. OEMs, authorised vendors and government-sponsored agencies may participate. Non-OEM bidders must submit an OEM agreement certificate for sourcing the relevant services.
Eligibility Criteria
  1. Minimum two years of experience in providing similar services to Central/State Government organisations or PSUs.
  2. Valid Level D simulator certification.
  3. Compliance with the technical specifications and scope of work.
  4. MSE bidders may claim applicable relaxations in experience and turnover requirements, subject to supporting documents and technical compliance.
  5. Startups are not eligible for the specified experience and turnover relaxation.
Financial Criteria
The minimum average annual turnover required is ₹5 lakh during the last three financial years. Audited financial statements or a CA/CMA certificate must be submitted.
The bidder must also furnish the prescribed EMD and comply with the financial and commercial conditions of the tender.
Tender Fee and EMD
  1. Tender Fee: Nil.
  2. EMD: ₹2,91,816.
  3. EMD Bank: State Bank of India.
  4. EMD exemption: Available to eligible MSE service providers under applicable GeM rules, subject to valid supporting documents.
  5. ePBG: 3% of contract value, valid for 38 months as specified in the GeM bid.
Submission Guidelines
The tender follows a Two-Packet Bid System, comprising Technical and Financial Bids. Bidders must submit their offers through the GeM portal and provide clause-wise technical and commercial compliance statements.
All required certificates, experience records, turnover documents, simulator certification and OEM authorisation (where applicable) must be uploaded. The bid documents must be duly signed and stamped.
Bid validity: 180 days from the bid closing date as specified in the GeM bid.
Important Deadlines
  1. Tender Publishing Date: 12 November 2026
  2. Pre-Bid Meeting: Not mentioned in the available tender documents.
  3. Bid Submission Deadline: 3 December 2026, 3:00 PM
  4. Bid Opening Date: 4 December 2026, 3:00 PM
2. Tender Details and Financial Eligibility Table
Particulars
Details
Minimum Average Annual Turnover
₹5 Lakh
Net Worth Requirement
Not Specified
Minimum Experience
2 Years
Submission Mode
(GeM online aBoth nd postal submission details provided in ATC)
EMD Exemption
Yes
Tender Fee
₹0
EMD
₹2,91,816
Mode of EMD
SBI – DD/FDR/Banker's Cheque/Bank Guarantee; GeM conditions also apply
Estimated Cost
Not explicitly specified
Start Date of Document Collection
12 November 2026 (Bid publication date)
Pre-Bid Meeting Date
Not Mentioned
Last Date for Submission
3 December 2026, 3:00 PM
Opening Date
4 December 2026, 3:00 PM
3. Document Checklist
Bidders should prepare the following documents before submission:
  1. Company/Organisation Registration Certificate
  2. GST Registration Certificate
  3. PAN Card of the Organisation
  4. Udyam Registration Certificate (if applicable)
  5. Audited Balance Sheets for the last three financial years
  6. CA/CMA Turnover Certificate
  7. Similar Work Experience Certificates
  8. Copies of Previous Work Orders/Contracts
  9. Valid Level D Simulator Qualification Certificate
  10. Simulator Certificate Validity Details
  11. Simulator Configuration, Aircraft Type and Location Details
  12. Latest Recurrent Evaluation/Renewal Report, if applicable
  13. OEM Authorisation/Agreement Certificate (if applicable)
  14. Technical Compliance Statement
  15. Commercial Compliance Statement
  16. EMD Payment Proof or Exemption Documents
  17. Signed and Stamped Tender Documents
  18. Required ATC Certificates and Additional Documents
  19. Bank Account Details for Electronic Payments
SkillCouncils.com
Call / WhatsApp: 9630030343

       Email: support@skillcouncils.com 

Minimum Average annual Turnover ₹5 Lakh
Net Worth Not Specified
Minimum Experience 2 Years
Submission Mode online
EMD Exemption Yes
Tender Fee (Number) N/A
EMD (Number) ₹2,91,816
Mode of EMD online
Estimated Cost N/A
Start Date of Document Collection 12 November 2026
Pre-Bid Meeting Date N/A
Last Date for Submission 3 December 2026, 3:00 PM
Opening Date 4 December 2026, 3:00 PM
Download the Document View Document

Enquire Now